Worked on by a technician with tech-school and dealer training (970) 670-8323

Auto Repair Pros Fraser logo
Brake rotor and caliper visible on a vehicle in the shop

Brakes

Brake Repair in Fraser, CO

Firm, quiet, straight stops again, with pads, rotors and calipers measured and itemized on the quote before a single bolt is turned.

Get a brake price — (970) 670-8323

Brake Work Priced Part by Part

Brake quotes are easy to pad: a full kit of pads, rotors and hardware on every axle whether it needs them or not. At Auto Repair Pros Fraser we measure first. We put a micrometer on the rotors, check pad depth, work each caliper and test the fluid, and only parts that are out of spec go on the quote.

Grand County braking is hard work. Steep descents heat rotors, winter grit chews pads, and moisture in old fluid lowers its boiling point. We take all of that into account when we tell you what needs doing now and what has another season left.

What Moves the Price

Brake jobs vary more than people expect. These are the main reasons:

Pads only, or pads and rotors
If rotors are above minimum thickness and run true, they stay, and the job costs far less.
Caliper condition
A sticking caliper has to be freed or replaced or the new pads will wear unevenly.
Fluid age
Old fluid is flushed when its moisture test fails, not on every visit by default.
Front, rear or both
Axles wear at different rates; we quote each one separately.

When to Book a Brake Check

Any of these is worth a free inspection:

  • Squealing or chirping as you start to brake
  • Grinding that you can hear or feel
  • A pulsing pedal on long downhill stops
  • Pulling to one side when braking
  • A soft or sinking pedal

What the Work Can Include

Only what the measurements call for:

  • Pads and hardware

    New pads with fresh clips and shims so they sit flat and stay quiet.

  • Rotors

    Resurfaced when there is enough metal, replaced when thin or warped.

  • Calipers and slides

    Cleaned and lubricated, or replaced when seized.

  • Fluid flush

    Moist fluid swapped for fresh to keep the pedal firm on descents.

  • Lines and hoses

    Corroded or cracked lines flagged with their own price.

  • ABS faults

    Sensor and module testing when the warning light is on.

How a Brake Job Goes

  • Measure

    Wheels off, everything measured and the fluid tested, usually in under an hour.

  • Itemized quote

    A call with each part, its cost and how urgent it is.

  • Repair and road test

    Approved work done, pads bedded in, vehicle driven before pickup.

Brake Work Is Covered

Brake repairs we perform carry our 12-month, 12,000-mile warranty. If a part we installed fails inside that period, bring the vehicle back and we take care of it.

Common Questions

Why did another shop say I need rotors?

Many shops replace rotors by default. We measure them; if they are within spec and run true, you keep them.

How long does a brake job take?

Most single-axle pad and rotor jobs are finished the same day. Calipers or lines can add time, which we mention with the quote.

Get Your Brake Price

Book a free inspection and hear exactly which parts are worn and what they cost.

Book a brake check — (970) 670-8323